Ritvik "Megabloks" #9758 "Monster Truck"

  1 - decal sheet
  1 - instruction booklet

  4 - 9.3cm x 3.5cm black wheel
  2 - 14.2cm black axle

  1 - 8 x 24 x 1/2 black plate
  1 - 8 x 16 x 1/2 black plate

 29 - 2 x 4 x 1 grey brick (1 spare)
 10 - 2 x 4 x 1 purple brick
 30 - 2 x 2 x 1 grey brick (2 spare)
  8 - 2 x 2 x 1 purple brick
  1 - 1 x 8 x 1 grey brick
 18 - 1 x 8 x 1 purple brick
  3 - 1 x 4 x 1 grey brick
  5 - 1 x 4 x 1 purple brick
 16 - 1 x 2 x 1 grey brick
 15 - 1 x 2 x 1 purple brick (2 spare)
  7 - 1 x 2 x 1 brown brick
  2 - 1 x 2 x 1 orange brick
 13 - 1 x 1 x 1 purple brick (1 spare)

  5 - 2 x 12 x 1/3 grey plate
 12 - 2 x 12 x 1/3 purple plate
  4 - 2 x 12 x 1/3 orange plate
  4 - 2 x 12 x 1/3 black plate
 32 - 2 x 4 x 1/3 grey plate (1 spare)
 26 - 2 x 4 x 1/3 purple plate
  2 - 2 x 4 x 1/3 orange plate
  2 - 2 x 4 x 1/3 brown plate
  6 - 2 x 4 x 1/3 black plate
 22 - 1 x 4 x 1/3 grey plate (1 spare)
 24 - 1 x 4 x 1/3 purple plate
  8 - 1 x 4 x 1/3 orange plate
  4 - 1 x 4 x 1/3 black plate
 18 - 1 x 2 x 1/3 grey plate
 31 - 1 x 2 x 1/3 purple plate (2 spare)
  4 - 1 x 2 x 1/3 orange plate
  4 - 1 x 2 x 1/3 black plate

  3 - 1 x 1 x 1 grey cylinder
  8 - 1 x 1 x 1 purple cylinder
  4 - 1 x 1 x 1 transparent red cylinder

  8 - 1 x 1 x 1/3 round black plate (gem) (3 spare)
  5 - 1 x 1 x 1/3 round transparent yellow plate (gem) (3 spare)

 12 - 2 x 3 x 1 grey reverse slope
 10 - 2 x 3 x 1 purple reverse slope
  4 - 2 x 3 x 1 orange reverse slope
 14 - 2 x 2 x 1 purple reverse slope
 16 - 2 x 2 x 1 orange reverse slope
  5 - 2 x 2 x 1 grey roof brick
 28 - 2 x 2 x 1 purple roof brick

  6 - 2 x 2 grey tile (1 spare)
  4 - 2 x 2 transparent yellow tile

  8 - 3.5 - 4.5 cm black sprung shock absorbers

  3 - 6.5 cm orange antenna (1 spare)
  5 - 4.75 cm grey flagpole (1 spare)
  2 - 9.5 cm orange rod with end clips and middle T

  2 - 1 x 3 x 3 purple slope with studs
  4 - 2 x 4 grey rockers
  2 - 1 x 1 x 1/3 grey plate with 1 cm clip
  8 - 1 x 1 x 1/3 grey plate with side axle
  3 - 2 x 2 orange disk reflector (1 spare)
  1 - 3 cm black disk with center 1 x 2 handle
  6 - (2 x 2 => 1 x 1) x 1 grey cone
 15 - 1 x 2 x 1 grey brick with axle hole and side sockets (2 spare)
 10 - 1 x 2 x 1 black decorative brick (octagons and grillwork)
  4 - black parallelogram (instructions and box shows orange, not black)
  8 - shock absorber mount pieces (roughly 2 x 5 x 3 with extensions)
  4 - grey 2 x 2 plus 2 x 2 "chairs"
  4 - purple 2 x 2 plus 2 x 2 "chairs" (no holes in "back")
 10 - 2 x 2 x 1/3 grey plate with added "handle"