Ritvik "Megabloks" #9780 "USS Kittyhawk"

  1 - decal sheet (very large)
  1 - instruction book

651 - 2 x 4 x 1 grey (19 spare)
  8 - 2 x 4 x 1 clear
  3 - 2 x 4 x 1 black
 94 - 2 x 2 x 1 grey (3 spare)
  2 - 2 x 2 x 1 clear
  1 - 2 x 2 x 1 black
 20 - 1 x 8 x 1 grey (1 spare)
  5 - 1 x 6 x 1 grey
 37 - 1 x 4 x 1 grey
 73 - 1 x 2 x 1 grey
 10 - 1 x 2 x 1 clear (1 spare)
  7 - 1 x 1 x 1 grey
 64 - 2 x 3 x 1 grey reverse slope (1 spare)
 41 - 2 x 2 x 1 grey reverse slope (1 spare)
 10 - 2 x 2 x 1 grey roof brick (1 spare)

  2 - 8 x 16 x 1/2 black
 14 - 8 x 8 x 1/3 grey (1 spare)
  4 - 8 x 8 x 1/3 black (1 too few)
 11 - 2 x 12 x 1/3 grey
152 - 2 x 4 x 1/3 grey (3 spare)
 10 - 2 x 4 x 1/3 black
 56 - 1 x 4 x 1/3 grey (1 spare)
 10 - 1 x 4 x 1/3 black
  9 - 1 x 3 x 1/3 grey
  2 - 1 x 3 x 1/3 black
 96 - 1 x 2 x 1/3 grey (14 spare)
 16 - 1 x 2 x 1/3 black
  1 - 1 x 2 x 1/3 grey
  1 - 1 x 2 x 1/3 trans red

  1 - 4 x 4 x 1 grey cylinder (with pivot base)
  1 - 4 x 4 => 2 x 2 grey cone
  4 - 2 x 2 => 1 x 1 grey cone
  5 - 2 x 2 x 1+ grey brick with side axle
  8 - 2 x 2 x 1/3 + 2 x 2 x 1/3 grey "chair", normal plus holes
  4 - 2 x 2 x 1/3 + 2 x 2 x 1/3 grey "chair", normal plus studs
 15 - 1 x 2 x 1 grey decorated brick (octagon/grill) (1 spare)
 25 - 1 x 1 x 1 grey cylinder
  2 - 1 x 2 x 1 grey brick with hole
  2 - pair 1 x 4 x 1/3 + 1 x 4 x 1/3 black hinge
 18 - 2 x 2 x 1/3 grey double-side plate (studs on both sides) (1 spare)
 35 - 1 x 1 x 1/3 grey round plate (gem) (4 spare)
 15 - 1 x 1 x 1/3 black round plate (gem) 2 spare)
 10 - 1 x 1 x 1/3 trans yellow round plate (gem) (2 spare)
  8 - 1 x 1 x 1/3 trans red round plate (gem) (6 spare)
  3 - grey gun barrel (1 spare)
 10 - 1 x 2 x 1-1/2 grey pivot block
  2 - 1 x 3 x 4 grey studded triangle
  7 - 2 x 2 x 1/3 + handle grey plate
  7 - 2 x 2 x 1/3 + handle black plate
 62 - 2 x 2 x 1/3 black tile (7 spare)
 33 - 2 x 2 x 1/3 grey tile (3 spare)
 17 - 1 x 1 x 1/3 grey round w/side clip
  8 - 1 x 1 x 1/3 grey round w/side pin
 11 - 1 x 1 x 1/3 black w/side pin
  5 - 1 x 1 x 1/3 grey w/side pin

  2 - 2 x 2 x 2/3 black octagonal "reflector"
  2 - large grey trapezoid
  1 - 3-inch black tubing
  5 - 1-inch black treaded wheel
  8 - 2-inch airplanes
 20 - 8 x 12 x 1/2 black tile w/corner studs (deck plates)
  2 - pair 4 x 8 x 1/2 black triangular tile (used as deck plates)
  1 - large grey winch arm